INTAKS® Scaffold & Edge Protection Solutions

Floor Clamp

INTAKS® Scaffold & Edge Protection Solutions

Floor Clamp

Floor Clamps allow edge protection to be installed on floor overhangs and balconies. Ease of installation is complemented by the neat and tidy on-site appearance.

Benefits

This configuration provides a simple and elegant edge protection solution that doesn't involve drilling into the floor surface:

  • Light aluminium components are easy to manhandle around your site. No heavy lifting required.
  • No need to drill into the floor.
  • Edge protection supported by concrete floor.
  • Quick to install and adjust.
  • Up to 3.6m spans between handrail posts.
  • Two or three handrail configurations available.
  • Handrail height is adjustable.
  • Lock Pin & R-Clip and Spring Clip mechanisms allow for visual inspection of correct installation.
  • Modular components may be re-used in other configurations. No need to purchase a completely separate edge protection system.
  • Nominal weight is 4.5kg/m to 5.5kg/linear metre, depending on set-up.
Installation process

Easy to understand and follow installation process:

  1. Brackets, Standard Arm and Handrail Post pre-assembled on the ground. No tools required.
  2. Pre-assembled unit and packers positioned on the floor slab. Clamped into position by tightening Threaded Rod.
  3. Handrails secured to Handrail Posts using tool-less Spring Clip mechanism.
  4. Complete final checks and handover to site manager.
  5. Dismantle process is the reverse to installation.
Components

Components are sturdy, robust, quickly assembled, and can be used with other configurations.

For handrail:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners

For each post:

  • 1 x Handrail Post/Swivel Handrail Post (part #1101/#1102)
  • 1 x Boot Bracket (part #1148)
  • 2 x Lock Pins (part #1182)
  • 2 x R-Clips (part #1900)

Note: exact components required will vary depending on set-up and site-specific requirements. 25mm timber packer (not supplied) can be used to prevent deflection, if required.

INTAKS® Scaffolding & Edge Protection solutions

Want to learn more then get in touch with us today

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.