INTAKS® Scaffold & Edge Protection Solutions

Face Fixed

INTAKS® Scaffold & Edge Protection Solutions

Face Fixed

This configuration provides edge protection for tilt slab-constructed buildings or other concrete edges where protection is required. Easy to install and adjust. Dependable, innovative engineering that will keep you ahead of the curve.

Benefits

With INTAKS Face Fixed, you don't need to spend days getting your edge protection in place. It comes together easily, leaving you with a compliant solution. This allows your project to move ahead, without traditional scaffolding-related delays.

  • Highly adaptable and suitable for multiple situations.
  • Components are supported by concrete tilt slab or other concrete edge.
  • Up to 3.6m spans between handrail posts.
  • Two or three handrail configurations available.
  • Handrail height is adjustable.
  • Handrail distance from edge of building is adjustable, allowing for floor overhangs or soffits.
  • Lock Pin & R-Clip and Spring Clip mechanisms allow for visual inspection of correct installation.
  • Modular components may be re-used in other configurations. No need to purchase a completely separate edge protection system.
Installation process

Installation follows a simple, repeatable process:

  1. Installer works from safety of a scissor lift or EWP.
  2. Boot Bracket bolted onto concrete with Ankascrew bolts.
  3. Standard Arm and Handrail Post inserted into Boot Bracket. Secured in place using tool-less Lock Pin & R-Clip mechanism.
  4. Depending on height, handrail tubes can be handed up to EWP from the ground. A handrail tube only weighs around 6kg.
  5. Handrails secured to Handrail Posts using tool-less Spring Clip mechanism.
  6. Complete final checks and handover to site manager.
  7. Dismantle process is the reverse to installation.
Components

Precision-manufactured steel yellow brackets and durable, rust-free, aluminium.

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners

For each post:

  • 1 x Handrail Post/Swivel Handrail Post (part #1101/#1102)
  • 1 x Standard Arm (part #1172)
  • 1 x Boot Bracket (part #1148)
  • 2 x Lock Pins (part #1182)
  • 2 x R-Clips (part #1900)

Note: exact components required will vary depending on set-up and site specific requirements  

INTAKS® Scaffolding & Edge Protection solutions

Want to learn more then get in touch with us today

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.