INTAKS® Scaffold & Edge Protection Solutions

Attached Scaffolding – 1M Down

INTAKS® Scaffold & Edge Protection Solutions

Attached Scaffolding – 1M Down

This scaffolding configuration attaches directly to the house frame. Provides excellent access for workers on site. 1M Down has been specifically designed to allow super quick installation. When no longer needed, it comes down just as fast. No hold-ups to construction progress. Better for the builder and for other trades.

Benefits

INTAKS Attached 1M Down scaffold provides great access with minimal gear:

  • Much more space because the building supports the scaffold.
  • Uses building frame to help level and brace the scaffold.
  • Especially useful on smaller sites.
  • Flat and uniform platform.
  • Variable spans between uprights allow obstacles to be worked around.
  • Fast and easy install and dismantle process so less time waiting around for scaffolders.
  • Tool-less assembly contributes to speed and ease of install and dismantle.
  • Suitable for timber and steel framed buildings.
  • Strong but light: easy to load, unload and carry.
Installation process

The install process is easy to follow and complete:

  1. Lay out Soleboards and Screwjacks where Standards are required.
  2. Mark out position, 1 metre down from top plate, to attach Stud Brackets to building frame.
  3. Attach Stud Brackets.
  4. Configure support frames.
  5. Put support frames into position.
  6. Install platform with Interlocking Planks.
  7. Create Ladder access and install Swing Gate.
  8. Install Handrails using tool-less Spring Clip mechanism.
  9. Install Toeboards using tool-less Toeboard Plank Clips.
  10. Complete final checks and hand over to site manager.
  11. Dismantle process is the reverse to installation.
Components

Components are sturdy, robust, and easy to handle.

For handrails:

  • Handrail Tube (part #HR4 to HR#6)
  • Handrail Joiners/External Sleeve Couplers (part #1165/#SES)
  • Fixed 90° Couplers (part #SFC) and/or Swivel Couplers (part #SSC) – for joining handrails at corners
  • Handrail Post (part #1101) – for safely installing handrails on upper levels

For each support frame:

  • 1 x Soleboard (part #ISB)
  • 1 x Screwjack (part #SSJ450 or #SSJ620)
  • 1 x Extender (part #1144/#1160)
  • 1 x Platform Arm Bracket (part #1076)
  • 1 x Standard Arm (part #1172 to #1177)
  • 1 x Standard (part #1178 to #1181)
  • 1 x Square Spring Clip (part #1146)
  • 1 x Stud Bracket (part #1003), Stud Bracket Narrow (part #1005), Stud Bracket Bent Long (part #1006), or Stud Bracket Bent Short (part #1004)

For platforms:

  • Interlocking Planks (part #ILP3 to ILP6)
  • Plank Staples (part #1158)
  • Plank Clamps – Single (part #1087) / Double (part #1080) / Tube (part #1079)
  • Toeboards (part #1210)
  • Toeboard Clips – Plank (part #1211)

Other:

  • Lock Pins (part #1182)
  • R-Clip (part #1900)
  • Ladder (part #LAD3.6/#LAD5.4)

Note: exact components required will vary depending on set-up and site specific requirements

INTAKS® Scaffolding & Edge Protection solutions

Want to learn more then get in touch with us today

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.